House Washing and Tips for Cleaning the Roof

Roof cleaning is often perceived as the most complicated part of the whole house washing activity. Most consider cleaning the roof as a tough proposition, primarily because of the difficulty of accessing it. Thus, cleaning the roof is an operation, which is always deferred for a later date, while performing the arduous task of house washing. Because of this neglect during periodic washing of the house, the roof develops a lot of dirt and becomes greasy, which is difficult to treat. At such times, to clean the roof, you need to request the professional cleaners services. Port City Power Washing-Power Washing is one of the authority sites on this topic. However, considering the vast amount of dirt and grease on the building, it is a expensive proposition to get it washed by skilled cleaning firms. Daily roof cleaning should prevent such situations from occurring.

The water and cleaning solution draining off into the garden and ruining your plants is one of the difficulties that arises when you clean the roof. Thus, the utmost care has to be taken when cleaning the roof to control the run-offs from the cleaning zone.

Black staining is another area of concern when it comes to cleaning up the roof while washing the house. The stains make the surface of the roof greasy, and hard to tread. High-pressure cleaning is the most effective approach at these times. The black stains on the roof surface are a result of the growth of algae and fungus spores. To tackle this problem, you need to use certain cleaning solutions that are specialized in eliminating such fungal growth. These cleaning solutions are extremely effective in roof cleaning when combined with high pressure jets of heat-regulated water.

A water pressure range of 1000psi to 1800psi is advisable for cleaning your roof using the high pressure cleaning technique. The higher the pressure, the more efficient the cleaning process becomes. However, due to excess water pressure, care should be taken to ensure that the roof does not get damaged. An enquiry with the roof manufacturer can determine the ideal pressure setting of the pressure water – the equipment used for high pressure cleaning. In the case of metal roofs, water pressure can be maintained towards the higher end of the above-mentioned pressure range, whereas in the case of clay tiled roofs it will be to the lower end of that band. However, a pressure lower than 1000psi may need to be maintained for wood shingle roofs in order to avoid damage to the roof.

Roofs often have crevices and places where a lot of dirt is often accumulated are difficult to reach. Due to the great amount of time and effort required to reach them, these areas get neglected during regular house washing stints. Extension wands must be used to clean those areas. Those wands are thinner than the usual cleaning hose for strength. As a result, the wands allow focused thinner water jets and cleaning solution to be directed toward the target area under high pressure. Extension wands also help to reduce the amount of water and clean solution required to clean the roof, resulting in significant cost savings.